Objective: | Public Health and Clinical Data Exchange |
---|---|
Measure: | Public Health Registry Reporting |
Measure ID: | PI_PHCDRR_4 |
Multiple Registry Engagement: | Report as true if active engagement with more than one public health registry in accordance with PI_PHCDRR_4. |
Multiple Registry Engagement Measure ID: | PI_PHCDRR_4_MULTI |
Exclusion: | Any MIPS eligible clinician meeting one or more of the following criteria may be excluded from the Public Health Reporting measure if the MIPS eligible clinician: |
Measure Exclusion ID: | 1. PI_PHCDRR_4_EX_1 |
PDF link: |
Definition of Terms
Active engagement:
The MIPS eligible clinician is in the process of moving towards sending "production data" to a public health agency or clinical data registry, or is sending production data to a public health agency (PHA) or clinical data registry (CDR).
Active engagement may be demonstrated in one of the following ways:
- Option 1 – Completed Registration to Submit Data: The MIPS eligible clinician registered to submit data with the PHA or, where applicable, the CDR to which the information is being submitted; registration was completed within 60 days after the start of the MIPS performance period; and the MIPS eligible clinician is awaiting an invitation from the PHA or CDR to begin testing and validation. This option allows MIPS eligible clinicians to meet the measure when the PHA or the CDR has limited resources to initiate the testing and validation process. MIPS eligible clinicians that have registered in previous years do not need to submit an additional registration to meet this requirement for each MIPS performance period.
- Option 2 – Testing and Validation: The MIPS eligible clinician is in the process of testing and validation of the electronic submission of data. MIPS eligible clinicians must respond to requests from the PHA or, where applicable, the CDR within 30 days; failure to respond twice within a MIPS performance period would result in that MIPS eligible clinician not meeting the measure.
- Option 3 – Production: The MIPS eligible clinician has completed testing and validation of the electronic submission and is electronically submitting production data to the PHA or CDR.
Production data:
Refers to data generated through clinical processes involving patient care, and it is used to distinguish between data and “test data” which may be submitted for the purposes of enrolling in and testing electronic data transfers.
Reporting Requirements
YES/NO
The MIPS eligible clinician must attest YES to being in active engagement with a PHA to submit data to public health registries.
For multiple registry engagement, report as YES if there is active engagement with more than one public health registry.
Scoring Information
Required for Promoting Interoperability Performance Category Score: Yes, must select at least two of the five Public Health and Clinical Data Exchange measures
Measure Score: 10 points
Eligible for Bonus Score: No
Note: The following measures are included in the Public Health and Clinical Data Exchange objective: Immunization Registry Reporting, Electronic Case Reporting, Public Health Registry Reporting, Clinical Data Registry Reporting, and Syndromic Surveillance Reporting.
MIPS eligible clinicians must:
- Submit a “yes” to the Prevention of Information Blocking Attestations
- Submit a “yes” to the ONC Direct Review Attestation, if applicable
- Submit a “yes” that they have completed the Security Risk Analysis measure during the calendar year in which the MIPS performance period occurs
- Must report the required measures from each of the four objectives in order to earn a score greater than zero for the Promoting Interoperability performance category
Additional Information
- MIPS eligible clinicians must use EHR technology certified to the 2015 Edition certification criteria to support the Promoting Interoperability performance category objectives and measures.
- MIPS eligible clinicians are required to report certain measures from each of the four objectives, with performance-based scoring occurring at the individual measure-level. Each measure is scored based on the MIPS eligible clinician’s performance for that measure, based on the submission of a numerator/denominator, or “yes or no” statement.
- The measures under the Public Health and Clinical Data Exchange objective are reported using “yes or no” responses. The MIPS eligible clinician will receive the full 10 points for reporting two “yes” responses, or for submitting a “yes” for one measure and claiming an exclusion for another. If there are no “yes” responses and two exclusions are claimed, the 10 points will be redistributed to the Provide Patients Electronic Access to Their Health Information measure.
- If reporting the active engagement with multiple registry measure (PI_PHCDRR_4_MULTI) then the objective has been met and no additional measures in this objective need to be reported.
- Reporting more than two measures for this objective will not earn the MIPS eligible clinician any additional points, but they will meet the requirements for the objective.
- More information about Promoting Interoperability performance category scoring is available on the QPP website.
- A MIPS eligible clinician may count a specialized registry under this measure if the MIPS eligible clinician achieved the phase of active engagement as described under “active engagement option 3: production” meaning the clinician has completed testing and validation of the electronic submission and is electronically submitting production data to the public health agency.
- The definition of jurisdiction is general, and the scope may be local, state, regional or at the national level. The definition will be dependent on the type of registry to which the provider is reporting. A registry that is ‘‘borderless’’ would be considered a registry at the national level and would be included for purposes of this measure.
- MIPS eligible clinicians who have previously registered, tested, or begun ongoing submission of data to a registry do not need to “restart” the process.
- MIPS eligible clinicians may claim the exclusions if they are reporting as a group. However, the group must meet the requirements of the exclusion as a group.
- When MIPS eligible clinicians choose to report as a group, data should be aggregated for all MIPS eligible clinicians under one Taxpayer Identification Number (TIN). This includes those MIPS eligible clinicians who may qualify for reweighting such as a significant hardship exception, hospital or ASC-based status, or in a specialty which is not required to report data to the Promoting Interoperability performance category. If these MIPS eligible clinicians choose to report as a part of a group practice, they will be scored on the Promoting Interoperability performance category like all other MIPS eligible clinicians.
Regulatory References
For further discussion, please see the Medicare Access and CHIP Reauthorization Act of 2015 (MACRA) final rule: 81 FR 77229.
For additional discussion, please see the 2018 Physician Fee Schedule final rule – Quality Payment Program final rule: 83 FR 59790.
In order to meet this objective and measure, a MIPS eligible clinician must use the capabilities and standards of CEHRT at 45 CFR 170.315 (f)(6) and (f)(7).
Certification Standards and Criteria
Below is the corresponding certification and standards criteria for electronic health record technology that supports this measure.
Certification Criteria:
Information about certification for 2015 Edition CEHRT can be found at the links below:
§170.315(f)(6) Transmission to public health agencies—antimicrobial use and resistance reporting
§170.315(f)(7) Transmission to public health agencies—health care surveys
Standards Criteria:
Standards for 2015 Edition CEHRT can be found at the ONC’s 2015 Standards Hub:
https://www.healthit.gov/topic/certification/2015-standards-hub